The blade is loaded under low electrical voltage
When human skin touches the blade, the electric signal of the blade changes because the human body is conductive
The change of electric signal activates immediately the piston with the electronic security system
The blade disappears under the table
When the blade retracts, it reaches a speed so high as to ensure the removal of the blade from the finger only
after about 5 milliseconds from the contact.
Once the safety system has been activated, it will be re‐charged automatically in 2 minutes and the panel saw
will immediately be ready for use.
If the system gets activated, it means that we have saved a hand.
motorized scoring unit
SCORING UNIT WITH ELECTRIC ADJUSTMENT
2 axes scoring unit with motorized adjustment on-off and display of the operation on the table with light led.
Cross-cut capacity mm 2170-2700-3260-3870-4370
Cross cut carriage sizes mm 630×1280
Main blade dia. mm 400
Rotation speed with inverter rpm 2000-6000
Blade tilt 0°-45°
Cut height at 90° mm 130
Cut height at 45° mm 90
Protruding from the working table with blade Ø 400 mm completely down at mm 25
Protruding from the working table with blade Ø 350 mm completely down at mm 0
Scoring blade diameter mm 125
Cut width between blade and rip fence – UNICA SAFE E (on request 1050 mm or 1600 mm) mm 1250
Cut width between blade and rip fence – UNICA SAFE EVO mm 1300
Cut width between blade and rip fence – UNICA SAFE DIGIT-PROGRAM (on request 1050 mm o 1300 mm) mm 1600
Motor power Hp (Kw) 7,5 (5,5)
Scoring unit motor power Hp (Kw) 1 (0,75)
Net weight UNICA SAFE E Kg 1100
Net weight UNICA SAFE EVO-DIGIT Kg 1240
Net weight UNICA SAFE PROGRAM Kg 1410
Noise level db(A) 85-